Metallographic cutting blade and metallographic grinding wheel blade

Product Introduction: Used for cutting metallographic specimens, all cutting pieces are made of selected special abrasives that are not easy to break; Sharp cutting, minimal cutting heat, and shallow heat affected layer of the sample greatly reduce interference and provide a better premise for the next step of metallographic sample preparation. Choosing the right grinding wheel cutting blade according to the different materials required for cutting can improve cutting efficiency and greatly reduce damage to the sample.

CLASSIFICATION：

A series products: gray cast iron, nodular cast iron, alloy cast iron, ordinary carbon steel unhardened parts, etc. HRC30-65 degrees.

B-series products: High quality carbon steel, alloy structural steel, tool steel, stainless steel, high-speed steel, high hardness quenched steel, etc. HRC30-70 degrees

D-series products: Suitable for cutting high hardness black metal materials, with a hardness of HEC30-70D degrees

Product specifications and packaging:

Φ250*1.2*32mm(100 Pieces/box)

Φ250*1.5*32mm(80 Pieces/box)

Φ250*2*32mm(60 Pieces/box)

Φ300*2*32mm(60 Pieces/box)

Φ350*2.5*32mm(40 Pieces/box)

Φ380*2.8*32mm(30 Pieces/box)

Φ400*2.8*32mm(30 Pieces/box)

Φ450*3.2*32mm(20 Pieces/box)